|
|
Huade Hydraulic A6VM200HA2T Hydraulic Motor: High Power Density + Low Energy Consumption to Drive Efficient Operation of Industrial EquipmentDetailed Product Parameters (Multi-Dimensional Analysis of Performance, Improving the "Technology + Adaptation + Guarantee" Full System)1. Core Technical Parameters: Excellent Performance Implementation, Balancing Efficiency and StabilityRelying on advanced design concepts, the Huade Hydraulic A6VM200HA2T Hydraulic Motor achieves breakthroughs in key indicators such as power, torque, and energy consumption, making it suitable for high-load operation scenarios of heavy machinery. The core parameters are as follows:
The rated power can reach 55kW, and the maximum power exceeds 62kW, with power density increased by 12% compared with similar products in the industry. The rated torque is as high as 2000N·m, and the peak torque can reach 2800N·m, which can easily meet the heavy-load starting needs of equipment such as rotary drilling rigs and crawler cranes. At the rated speed of 1500r/min, the torque fluctuation is ≤±3%, ensuring uniform power output during equipment operation and avoiding operation accuracy deviations caused by unstable torque.
The volumetric efficiency is ≥94%, the mechanical efficiency is ≥92%, and the total efficiency is stably above 88%, reducing energy consumption by 8%-10% compared with traditional hydraulic motors. Calculated based on 8 hours of continuous operation per day, it can save about 120L of hydraulic oil consumption per year. According to the current market price of hydraulic oil, the annual cost savings exceed 3,000 yuan. At the same time, the motor adopts a low-friction pair design, reducing the friction coefficient of internal components to 0.0015, which not only reduces energy loss but also extends the service life of core components.
It can withstand a maximum impact pressure of 45MPa and a rated working pressure of 35MPa. It can operate continuously for 2 hours without failure under 15% overload, and its load-bearing capacity meets the needs of complex operation environments such as mines and infrastructure construction. The working temperature range covers -40℃ to 110℃. It can start normally without preheating in a low-temperature environment of -30℃, and the oil temperature rise is ≤8℃ under high-temperature working conditions (100℃), avoiding seal aging or component deformation caused by abnormal temperatures. 2. Adaptation and Control Parameters: Multi-Scenario Compatibility, Precise Regulation of Operation ProcessTo meet the operation needs of different industrial equipment, the A6VM200HA2T Hydraulic Motor has been optimized in terms of installation adaptation and control accuracy to improve the flexibility of equipment integration. The specific parameters are as follows:
It adopts SAE Type B flange connection, and the output shaft specifications support two types: spline (ISO 4156-3:2005) and flat key. The spline has 14 teeth with a modulus of 2.5, and the flat key size is 16×10mm, which can be directly adapted to rotary drilling rigs, concrete pump trucks, and other equipment of brands such as XCMG, Sany, and Zoomlion. The axial dimension of the motor is only 380mm, and the radial dimension is 260mm, with a volume reduced by 15% compared with products of the same power, facilitating installation and layout in narrow spaces.
The rated speed is 1500r/min, the minimum stable speed can be reduced to 10r/min (no crawling phenomenon), and the maximum speed can reach 2200r/min. The speed adjustment range covers different operation scenarios such as low-speed heavy load and high-speed light load. When equipped with an electro-hydraulic proportional control module, the speed control accuracy is ±2r/min, and the flow control accuracy is ±3%, which can realize stepless adjustment of equipment operation speed and improve operation flexibility and accuracy.
The protection level reaches IP65, which can effectively resist dust and splashing water and adapt to outdoor open-air operation environments. The sealing system adopts imported fluororubber seals with oil pressure resistance of 38MPa. After 1800 hours of immersion in hydraulic oil, the sealing performance attenuation is ≤5% without leakage. The output shaft adopts a double-sealing structure to prevent lubricating oil leakage and external impurities from entering, and the sealing life can reach more than 8000 hours. 3. Service and Guarantee Parameters: Full-Cycle Support to Reduce Equipment Use RisksHuade Hydraulic provides a complete service system for the A6VM200HA2T Hydraulic Motor, with full support from installation guidance to after-sales maintenance. The specific parameters are as follows:
The delivery cycle for regular orders is ≤7 working days, and urgent orders (such as equipment failure replacement) are prioritized for production within 48 hours. 30 service outlets across the country can realize door-to-door delivery within 24 hours in urban areas and 48 hours in remote areas. After customers feedback technical problems, remote guidance is provided within 1 hour, and technical personnel are arranged to arrive at the site within 24 hours when on-site service is required.
The product enjoys an 18-month or 6000-hour warranty (whichever comes first). During the warranty period, free replacement of parts and maintenance services are provided for quality problems. After the warranty period, lifelong maintenance services are provided, and the maintenance cost is only 70% of that of similar products. At the same time, a "trade-in" service for parts is provided (the old parts can be used to offset 15% of the price of new parts).
Free operation and maintenance training is provided for customers (2 training places are allocated for each piece of equipment), covering the motor structure principle, operation specifications, fault diagnosis, and other contents. At the same time, lifelong technical support is provided, maintenance guides are regularly pushed, and 1-2 customer technical exchange activities are organized every year to share the latest application cases and technical upgrade information. |
